Poseidon-300 is certified according to ISO 13034, ISO 11611, ISO 11612 & EN 1149-5. […] and more. Ulterion ® N2000 flame retardant is also a cyclic phosphonate flame retardant additive. It is a good choice for flame retardant shirts or other light flame retardant clothing.The areas of Sonora fr-fabric use might be Transportation of Oil & Gas (pipelines workers), Petrochemical (refineries staff), Utilities (Electrical/Water/Gas service companies personnel) etc. And while we are talking about it – watch for decals, plastic, sparkles, etc. FR-Polyester has good durability and breathable properties, has good elasticity and abrasion resistance, it is soft and dries fast. That means FR-CVC clothing keeps its protective features during the whole life of a garment. Any amount of heat delivered within a long enough time interval will have no impact on the fabrics' integrity while a limited amount of heat delivered within short enough time interval may ignite or melt the fabric. Utilities (Electrical/Water/Gas service companies personnel) etc. Also, with additional finishing it can withstand to some aggressive chemicals.Flame retardant polyester fabrics can be used for work wear and rain wear (jackets, overalls etc) as well as for bags and backpacks of emergency personnel.We use only high grade polyester for producing our polyester fabrics. FR-Oxford is a middleweight flame retardant fabric with water resistant properties. We use double FR-treatment (THPC) to guarantee FR properties last 50-100wash. The National Cancer Institute testing Tris-BP showed that it was one hundred times more powerful than the carcinogens in cigarette smoke. Every batch of XM FireLine fabrics is tested for Flame Resistance after 50 washes.XMF flame retardant fabrics are certified to the following standards:260gsm | 87% Cotton, 12% Nylon, 1% Antistatic | FR-Satin 4/1245gsm | 80% Cotton, 19% Poly, 1% AS | FR-Twill 2/2185gsm | 80% Cotton, 19% Polyester, 1% Antistatic | FR-Plain 1/1300gsm | 80% Cotton, 19% Polyester, 1% AS | FR-Twill 2/2120gsm | 50% Meta-Aramid, 50% FR–Viscose | Plain 1/1210gsm | 93% M-Aramid, 5% P-Aramid, 2% AS | Twill 2/1150gsm | 93% M-Aramid, 5% P-Aramid, 2% AS | Plain 1/1260gsm | 93% M-Aramid, 5% P-Aramid, 2% AS | Twill 2/1180gsm | 93% M-Aramid, 5% P-Aramid, 2% AS | Twill 2/1250gsm | 98% Polyester, 2% Antistatic | FR-Plain 1/1280gsm | 60% Modacrylic, 39% Cotton, 1% Antistatic | FR-Knit200gsm | 60% Modacrylic, 38% Cotton, 2% Antistatic | Knitted fabric230gsm | 60% Modacrylic, 38% Cotton, 2% Antistatic | Knitted fabric.160gsm | 60% Modacrylic | 39% Viloft | 1% Antistatic | FR-Knit250gsm | 60% Modacrylic, 35% Cotton, 4% Nylon, 1% AS | RipStop200gsm | 60% Modacrylic, 39% Viloft, 1% Antistatic | FR-Knit300gsm | 60% Modacrylic, 35% Cotton, 4% Nylon, 1% AS | Twill 2/1Flame retardant fabric Sonora-185AS is a light protective fabric for hot climate made of 80% cotton, 19% polyester and 1% antistatic in plain 1/1 weave. Poseidon-300 is certified according to ISO 13034, ISO 11611, ISO 11612 & EN 1149-5. The degree of flame retardancy of the cured polyester resin is characterized by the ASTM E-84 tunnel test. It’s also banned from food storage and serving implements. Flame Retardant Polyester Film Developed to Improve Product Safety May 08, 2020 by Luke James A new PET film from Du Pont Teijin Films adds an extra layer of safety to a material widely used in electronic devices. It’s the fact that polyester sleepwear is infused with ‘natural’ flame retardants – bonded right into the fabric. Flame-Resistant (FR) Clothing ... nylon, polyester, or rayon. Flame retardant polyester fiber is widely used in cushion, sofa, clothing, special clothing and other products. One is the “normal” polyester, which makes the fibers soft and flexible, and the other is a short carbon chain with a lot of chlorine or fluorine atoms bonded to it. Carter’s and some others sell flame retardant treated cotton. Don’t know anything about flame retardants? FR-Polyester complies to ISO 14116, which is a standard for limited flame retardant properties.